Description

Dry Type Acrylic Bending Machines

Main functions and purposes: Dry-type acrylic bending machine/ heater is one new type of linear acrylic bending heater.

• It adopts thermal insulation, space insulation, shell cooling and automatic air-cooled, and other technologies. It does not need water cooling and it can be operated after being plugged in.
• It is easy to operate, environmentally friendly energy-saving, it can work 24 hours a day without maintenance.
• It can be used alone or with the rack and backup plate.
• It is truly a maintenance-free acrylic bending machine.

Packing List

• 1 pc of Bending machine,
• 1 pc of Power cord,
• 1 pc of spare electric wire,
• 1 pc of 300mm guiding rule(because it is not allowed for liquid, so the gradient will be taken off)
• 1 pc of 7mm handle sleeve
• 1 pc of 3mm hex wrench

How to use

1. The machine will produce some smoke from a thermal insulation layer, please set the Power regulator to 100 for a few minutes after the smoke disappears, then set the power regulation to around 45-65 according to the operation situation.
2. Please put the heating wire into the bottom of the heating groove if the heating wire is off the heating groove or incorrect positioning and then operate the machine
3. Adjust the ruler to 90° angle against the linear heating groove
4. Plug the Power cord into the power outlet then the power regulation display light on, adjust it to 50-60 till the heating wire is to a light red color
5. Put the acrylic panel on one side to the guiding rule and align the heating position at the heating groove.
6. Waiting 20-30 seconds(May be different indoor temperatures and machine settings) then the heating position softens to be bent, move the acrylic panel away from the machine, and adjust the bending angle on the table. The acrylic will take shape in a few seconds.
7. Please unplug the power cord after work.
8. The machine heater shell can be naturally cooled at 25℃ underrated power operation.
9. 100% Heater power operation or ambient temperature is high and in the case, the heating temperature of the shell exceeds 50 ℃ ± 5 ℃, the heater will automatically open the air cooling and cooling device.
10. When the temperature of the heater shell drops below 35 ℃ ± 5 ℃, the cooling device will be shut down automatically.
11. For the handle sleeve and the hex wrench for heating wire replacement, please keep them properly.

Application

Additional information